Depending on model, the oven is
supplied with the controls pushed in.
They have to be released before the
oven can be used.
Setting the time of day for the
first time
On models with a clock/timer you also
have to set the time of day before the
oven can be used.
The time can only be entered when
the function selector is at "0".
In the display:
– the clock symbol m (time of day) will
light up,
– and "I2:00" and triangle V
underneath the m symbol will start
flashing.
m
V
^
Use the P or O button to enter the
hour first of all.
^
Press the Q button.
This confirms the hour and the minutes
will then start to flash.
^
Use the P or O button to enter the
minutes.
^ Press the Q button to confirm the
minutes.
Once the clock has been set, the
current time of day will show in the
display and the colon will flash.
Before using for the first time
17
To Next Page
Loading...
Need help?
General
