FlexiClip telescopic runners HFC 70
The FlexiClip telescopic runners can be
used with any shelf level.
Push the FlexiClip telescopic
runners right into the oven before
placing accessories on them. The
accessories will then automatically
sit securely in between the stoppers
at either end of each runner and be
prevented from sliding off.
The FlexiClip runners can support a
maximum load of 15 kg.
Fitting and removing FlexiClip
telescopic runners
,
Danger of burning.
Make sure the oven heating
elements are switched off and cool.
The FlexiClip runners are fitted in
between the two rails that make up a
shelf level.
The FlexiClip runner with the Miele logo
is fitted on the right.
When fitting the FlexiClip telescopic
runners do not extend them.
^ Hook the FlexiClip runner onto the
front of the lower rail of a side rail (1.)
and then push it along the rail into the
oven compartment (2.).
Features
24
To Next Page
Loading...
Need help?
General
