EasyManuals Logo
Home>Miele>Vacuum Cleaner>HS11

Miele HS11 User Manual

Miele HS11
21 pages
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
Filters
Active AirClean 50 exhaust filter
(SF-AA 50)
Absorbs odours from the dirt in the
dustbag.
HEPA AirClean 50 exhaust filter
(SF-HA 50)
Excellent filtration level for very clean
exhaust air. This filter is particularly
suitable for allergy sufferers.
Filter grille
The filter grille is required if you wish to
use an AirClean filter instead of an
Active AirClean 50 filter or HEPA
AirClean 50 filter.
Electrical connection for the UK
All electrical work should be carried out
by a suitably qualified and competent
person in strict accordance with current
national and local safety regulations
(BS 7671 in the UK).
The voltage and frequency are given on
the data plate located underneath the
vacuum cleaner. Please ensure that
these match the household mains
supply. The fuse rating is quoted on the
plug.
The appliance is supplied with a cable
and moulded plug ready for connection
to a 230-240 V/50 Hz a.c. single phase
supply.
Non-rewireable plugs BS 1363
The fuse cover must be re-fitted when
changing the fuse, and if the fuse cover
is lost the plug must not be used until a
suitable replacement is obtained. The
colour of the correct replacement cover
is that of the coloured insert in the base
of the plug, or the colour that is
embossed in words on the base of the
plug, (as applicable to the design of
plug fitted).
Replacement fuses should be ASTA
approved to BS1362 and have the
correct rating. Replacement fuses and
fuse covers may be purchased from
your local electrical supplier.
Electrical connection AU, NZ
All work should be carried out by a
suitably qualified and competent
person in strict accordance with
national and local safety regulations.
The voltage and rated load are given
on the data plate located underneath
the vacuum cleaner. Please ensure that
these match the household mains
supply. The fuse rating is quoted on the
plug.
The appliance is supplied with a cable
and moulded plug ready for connection
to a 230V/50Hz AC single phase
supply.
Test Marks Electrical safety
RCM Mark
Electrically suppressed
according to AS/NZS 1044
en
42

Other manuals for Miele HS11

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Miele HS11 and is the answer not in the manual?

Miele HS11 Specifications

General IconGeneral
BrandMiele
ModelHS11
CategoryVacuum Cleaner
LanguageEnglish

Related product manuals