Fitting the handle
If the door hinging does not require
changing, the handle should now be
fitted to the door.
^ Secure handle a to the holes in the
door using screws b.
^ Fit covers c.
Installation
^ Remove any cable clips from the
back of the appliance.
^
Check that all parts at the back of the
appliance are unhindered. Remove
any hindrance.
^
Carefully push the appliance into
position. The appliance can be
placed directly against a wall.
Aligning the appliance
^
To align the appliance adjust the feet
using the spanner supplied.
Installation
26
To Next Page
Loading...
Need help?
General
