Problems water intake/drain
Issue Possible fault Solution
The buzzer sounds.
The display shows the
following:
No water intake
Open the water faucet
The water supply is
closed.
Open the water supply all the
way.
Fault water intake FXX
Before fixing the fault:
–
Turn the dishwasher off by
touching the s control.
Fault F12/F13: Fault in
the water intake.
–
Open the water supply all
the way and restart the
program.
– Clean the water intake filter,
see "User Maintenance
Instructions".
– The water pressure at the
water connection is lower
than 4.35 psi. Consult a
plumber.
Frequently asked questions
54
To Next Page
Loading...
Need help?
General
