Important:
After unpacking, let the appliance
stand for approx. 2 hours at room
temperature after transporting it to
its final location before connecting it
to the mains.
This is important for the correct
electronic functioning of the appliance.
^
Remove all the packaging materials
from the appliance.
Do not remove the cover to the
microwave outlet inside the oven.
^
Check the appliance for any
damage.
Do not use the microwave if
– the door is warped.
– the door hinges are loose.
– holes or cracks are visible in the
casing, the door, the door seal or the
oven interior walls.
Operating the appliance with this
type of damage will result in
microwave leakage and present a
hazard to the user.
^
Clean the inside of the oven and all
the accessories with warm water and
a little washing up liquid applied with
a well wrung-out soft sponge or cloth.
^
Stick the adhesive label supplied, on
to the appliance as shown.
Before using for the first time
21
To Next Page
Loading...
Need help?
General
