Establishing connection
For communication to take place, the cooker hood and the
hob have to be signed on.
^
Sign on the cooker hood (see "Fitting and installation
instructions Con|ctivity XKM 2000 DA").
The process for signing on the cooker hood must be
completed before the hob can be signed on.
^
Start the signing on process on the hob.
Induction hob KM 59**: see "KM 59**"
All other hobs: please refer to the "Con|ctivity /
Miele|home" section in the operating instruction manual for
your hob.
If the signing on process is unsuccessful, repeat the
procedure. If this does not solve the problem, call the Miele
Service Department.
Con|ctivity
11
To Next Page
Loading...
Need help?
General
