Miele PDR 908 HP Installations Plan

PDR 908 HP en-AU, NZ
 = standard,  = optional, + = only on request, - not available
11 276 500/05 7
Technical data
PDR 908 HP
Drying system
Heat pump
Drum volume
l
130
Load capacity
kg
8.0
Door opening diameter
mm
370
Electrical connection (EL)
Standard voltage (AU, NZ)
1N AC 230 V
Frequency
Hz
50
Total rated load
kW
1.44
Fuse rating
A
1 x 10
Supply cable min. cross-section
mm²
3 x 1.0
Supply cable with plug

Length of supply cable
mm
2000
Non-standard voltage MAR 230 (Marine)
1N AC 230 V
Frequency
Hz
60
Total rated load
kW
1.2
Fuse rating
A
1 x 10
Supply cable min. cross-section
mm²
3 x 1.5
Supply cable with plug

Length of supply cable
mm
2000
Condensate drain hose (ASK)
Max. drainage temperature
°C
70
Max. transient flow rate
l/min
3.6
On-site hose sleeve for drain hose
mm
10 x 30
Drain hose (internal diameter)
mm
10 (DN10)
Length of drain hose
mm
1500
Max. delivery head (from lower edge of machine)
mm
1000
Equipotential bonding (PA)
Appliance connection (separate kit required)

XCI-Box / XCI-AD interface

Peak load/energy management (SLA)
Appliance connection (with XCI-Box)

Payment system connection (KGA)
Connection of payment systems (with XCI-Box / XCI-AD)

Communication module (XKM)
Communication module XKM 3200 WL PLT

Installation on appliance feet (F)
No. of appliance feet
No.
4
Appliance foot, height-adjustable with thread
mm
± 5
Appliance foot diameter
mm
31.7
Anchoring (B)
Anchoring of Miele plinths
Miele plinth installation (fasteners included)

Required anchor points
No.
4
Wood screws according to DIN 571
mm
8 x 65
Wall plugs (diameter x length)
mm
12 x 60
Plinth floor anchoring (to be provided on site)
Appliance installation on on-site base (concrete or masonry)

Min. plinth installation footprint (W/D)
mm
600/650
Wood screws according to DIN 571
mm
6 x 50
Wall plugs (diameter x length)
mm
8 x 40

Miele PDR 908 HP Specifications

General

Door hinge	Left
Drum volume	130 L
Control type	Touch
Loading type	Front-load
Product color	Stainless steel
Built-in display	Yes
Custom panel-ready	No
Appliance placement	Freestanding
Drying system	Heat pump
Drying capacity	8 kg
Delay start (max)	24 h
Residual moisture	48 %
Spin-drying class	-
Maximum spin speed	- RPM
Noise level (drying)	- dB
Door opening angle	167 °
Current	10 A
Connected load	1440 W
Power plug type	Type F (CEE 7/4)
AC input voltage	220 - 240 V
AC input frequency	50 Hz

Weight and Dimensions

Depth	777 mm
Width	605 mm
Height	850 mm
Weight	72000 g
Package depth	820 mm
Package width	660 mm
Package height	940 mm
Package weight	78000 g
Door opening diameter	370 mm