Electrical connection
65
Remove the plinth panel
The electrical connection is located
behind the front cover in the middle of
the dishwasher plinth.
Disconnect the machine from the
mains supply.
All work on the electrical
connection must be carried out by
Miele, a Miele authorised technician
or a qualified electrician.
Unscrew the 2 screws (left and right)
and remove the plinth panel.
Screw the plinth panel back on when
work on the connection has been
completed.
Please refer to the installation
diagram provided.
Equipotential bonding connection
There is a screw connection point
marked at the back of the appliance,
to which additional equipotential
bonding can be connected.
Warning: this machine must be
earthed
The dishwasher can be connected
using a switch or a plug. The installation
must be performed by a suitably
qualified electrician in accordance with
local and national regulations.
To Next Page
Loading...
