Miele PW 6137 User Manual

§
Gas system fault
Call the Service Department
if restart does not work.
if
^
If the programme still will not start please call the
Service Department.
§
Gas system fault
Clean the lint filter.
Press the start button.
if
Clean the lint filter as described in "Cleaning and
care" and then press the START button.
On gas heated machines heavy foaming can lead to
a fault.
q
Drain valve fault
Call the Service Department
if restart does not work.
if
^ Check the on-site drainage system and then press
the START button.
A defective drain valve must be repaired by a Miele
Service technician only.
ö
Dispensing system fault
Fill dispenser 1
Press the start button
if
Replace the empty container with a full one.
§
Card fault
Card incorrectly inserted in card reader.
if
^
Insert the card the right way round in the card
reader.
After sales service
In the event of any faults please contact your Dealer
or the nearest Service Department.
When contacting the Service Department, please
quote the Model, Serial number (SN) and Material
number (M.Nr) of your machine. These are shown on
the data plate.
This is visible above the door aperture or at the back
of the machine.
Please let the Service Department know any error
message that has appeared in the display.
Should you require spare parts ensure that you only
use original Miele Spare Parts (and remember to let
the Spare Parts Department know the model, serial
number and material number of your machine).
Problem solving guide
28

Miele PW 6137 Specifications

General

Brand	Miele
Model	PW 6137
Category	Washer
Language	English