EasyManuals Logo
Home>Miele>Washer>PW 6163

Miele PW 6163 User Manual

Miele PW 6163
46 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #44 background imageLoading...
Page #44 background image
Provision must be made on site to switch off
all poles. Switches with a minimum all-pole
contact gap greater than 3 mm are suitable
for isolating the machine. These include
circuit breakers, fuses and relays (IEC/EN
60947).
If the machine is disconnected from the
electricity supply ensure adequate measures
are taken to ensure that the machine cannot
be
reconnected to the electricity supply until
all work has been carried out.
Determined R
sce
= 249.
This equipment complies with IEC
61000-3-12 provided that the short-circuit
power Ssc is greater than or equal to 7.6 MW
at the interface point between the user's
supply and the public system.
It is the responsibility of the installer or user of
the equipment to ensure, by consultation with
the distribution network operator if necessary,
that the equipment is connected only to a
supply with a short-circuit power S
sc
greater
than or equal to 7.6 MW.
Maximum permissible system impedance
Z
max
= 0.33 Ω
Maximum permissible system impedance
Z
sys
= 0.33 Ω
Equipotential
bonding
Equipotential bonding must be carried out if
required.
The heater rating is set ex-works to
15 kW PW 6163
24
kW PW 6243
30
kW PW 6323.
The heating will only be activated with a
minimum
suds levels of 70 column of water.
The motor is protected by a winding to
prevent
it overheating.
Connecting the dispenser pumps
Connection points for 4 time controlled
dispenser pumps which can be operated
without the multi-function module are located
behind the cover next to the electrical
connection point. See the wiring diagram
supplied.
Steam connection
Steam connection must only be carried out
by an authorised installer. See installation
diagram and installation instructions
supplied with the machine.
A steam valve and condensate trap are
available to order from your Miele Dealer or
the Miele Spare Parts Department.
After setting up and connecting the
machine successfully ensure that all
removable outer panels are correctly
fitted back into position.
Notes for the installer
44

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Miele PW 6163 and is the answer not in the manual?

Miele PW 6163 Specifications

General IconGeneral
BrandMiele
ModelPW 6163
CategoryWasher
LanguageEnglish

Related product manuals