Blower connection socket
The blower connection socket can be
used to connect the suction hose to the
blower outlet of the vacuum cleaner.
This is useful for dusting off radiators
and blowing dust out of inaccessible
corners so that it can be vacuumed up.
It can also be used to clean the suction
hose if it should ever become blocked.
^
Press the release button for the dust
compartment lid and raise the lid so
that it clicks into place.
^ Take out the exhaust filter or the filter
frame if present and replace with the
blower connection socket.
^ Close the dust compartment lid.
^
Open the accessory compartment
and insert the elbow of the suction
tube into the blower connection
socket.
Operation
21
To Next Page
Loading...
Need help?
General
