Installation
Building into a wall unit
To install a control unit at "eye level" a
special accessory kit is required for
connection to the hob.
This unit is obtainable from your Miele
dealer, or the Miele Spare Parts dept,
and consists of a 3.5 metre long con-
necting cable and an additional con-
nector box.
For some control units two cable and
connector box accessory kits are re-
quired:
Hob electronic con-
trol
No. of connecting
cable kits
KSE 200 1
KSE 202 2
KSE 204 2
The cable should be in conduit ap-
proved by the electricity regulatory
bodies. Only a suitably competent
person should install the connecting
cable from the control unit to the
hob.
Installation
18
To Next Page
Loading...
