Miele SEB 213 User Manual

Recommended use
Observe the cleaning instructions of
the floor manufacturer.
The Powerbrush is particularly suitable
for cleaning and restoring crushed
carpet pile of wall to wall carpeting and
floor coverings subject to hard wear,
especially in high traffic areas.
To clean hard flooring, it is better to use
the floor brush.
Do not use the powerbrush on:
– Floors with a variable or uneven
surface. The brush could come into
contact with the floor and cause
damage.
– High quality, hand knotted rugs, for
example Berber or Persian rugs, as
well as extremely long piled area
rugs and carpets. There is a danger
of the threads being pulled out. Turn
the powerbrush off to vacuum these
types of floor coverings and use only
suction.
Turning on the Powerbrush
SEB 217 with an upright vacuum
cleaner
The Powerbrush will start automatically
when the vacuum cleaner is turned on.
SEB 213 and SEB 217
The powerbrush can only be turned on
if the vacuum cleaner is also on. The
switch that controls the power brush
can be found on the hose handle.
Using the Powerbrush
^
To achieve the best results, slowly
pass the Powerbrush back and forth
over the carpet.
Operation
Indicator light
The electrobrush warning light has a
double function.
It lights
–
yellow, when the brush is in use
– red, if the brush roller is blocked.
This can occur if enough threads
wrap around it or if a large or long
object has been vacuumed up.
^ Turn off the vacuum cleaner and
unplug the power cord.
^ Remove the object preventing the
roller from turning (see the
"Maintenance and Care" section).
^
Wait approximately 2-3 minutes for
this safety feature to reset before
turning the vacuum cleaner back on.
en - Operation
20

Miele SEB 213 Specifications

General

Brand	Miele
Model	SEB 213
Category	Steam Cleaner
Language	English