en-US
24
Frequently asked questions
Problem Possible cause and solution
The vacuum cleaner
switches off automati-
cally.
On certain models, the
overheating warning
light also comes on .
A temperature limiter turns the vacuum cleaner off au-
tomatically if it gets too hot. This can occur if, for in-
stance, large articles block the wand or when the Fil-
terBag is full or contains particles of fine dust. A heav-
ily soiled exhaust or dust compartment filter can also
be the cause of overheating.
Turn the vacuum cleaner off immediately using the
On/Off foot switch , and unplug it.
After removing the cause, wait for approximately 20 -
30 minutes to allow the vacuum cleaner to cool down.
It can then be turned on again.
To Next Page
Loading...
Need help?
General
