Control panel
a START button
Press the START button to start a
programme.
The Start indicator lamp will flash as
soon as a programme can be
started. It lights up constantly once
the programme has started.
b Buttons for activating and
deactivating additional options
Indicator lamp lit up = activated
not lit up = deactivated
c Programme selector
The programme selector can be
turned clockwise or anti-clockwise.
To save energy, the light ring around
the programme selector goes out a
few minutes after the dryer has been
switched on, if no programme is
selected or if a programme is not
started. The light ring also goes out a
few minutes after a programme has
finished.
d Progamme sequence indicator
lamps
show the drying stage reached;
and Check lamps:
See "Problem solving guide" for
information on the check lamps.
e I-On/0-Off button
To switch the appliance on or off or to
interrupt a programme.
f Door Button
to open the door / to cancel a
programme.
Pressing this button will open the
door even when the appliance is
switched off at the mains.
If the appliance is switched on at the
mains and the door is opened the
drum lighting will come on. It will go
out a few minutes later to save
energy.
Description of the appliance
8
To Next Page
Loading...
Need help?
General
