To change the interior drum
lamp
^
Open the door.
Before changing the lamp,
disconnect the machine from the
mains power supply.
You will find the interior lamp cover at
the top of the drum aperture.
^
Insert the opener under the side
edge of the cover as illustrated.
^
Turn your wrist to make the cover
open downwards.
The temperature resistant lamp should
only be ordered from your Miele dealer
or the Miele Spare Parts Department.
The lamp must not exceed the
maximum wattage quoted on the
data plate and on the lamp cover.
^
Replace the lamp.
^
To close the flap push it upwards and
press it on the left and right until you
hear it click into position.
The cover must be fixed securely, as
otherwise moisture may seep in and
cause a short circuit.
Problem solving guide
33
To Next Page
Loading...
Need help?
General
