Clean out airways indicator
The
Clean out airways
indicator light
can be deactivated.
The
Clean out airways
indicator light
–
is activated when the machine is
delivered. The light is a reminder to
clean the fluff filters and to check
and clean the condenser unit, if
necessary. See "Problem solving
guide".
–
should only be deactivated if you are
certain that the fluff filters will be
cleaned after every drying
programme and that the condenser
unit will be checked and cleaned
regularly.
Follow steps A to F to programme and
store in memory.
Before you begin, first ensure that
:
– The tumble dryer is switched off.
–
The door is closed.
–
The programme selector is at
Finish
.
A Press the
Start
button and keep it
pressed in whilst carrying out steps
B-C.
B Press the
I-On/0-Off
button in.
As soon as the indicator light for the
Start
button lights up constantly . . .
C . . . release the
Start
button.
D Turn the programme selector to the
Woollens hand care
position.
P... i will appear alternately in the
display to show that a setting is
selected.
The number which appears alternately
in the display with P means:
I the Clean out airways indicator
light is activated
(the
Drying
indicator light will also
flash)
0 the Clean out airways is
deactivated
E Pressing the
Start
button switches
from one number to the other.
F Switch the machine off with the
I-On/0-Off
button.
The setting you have selected is now
stored in memory. You can change it
again at any time.
Programmable functions
49
To Next Page
Loading...
Need help?
General
