Altering a programme
Once a programme has started, no
changes to the programme or addi-
tional options will be accepted.
If the programme selector is turned to
a different programme after a program-
me has begun, the “Drying” indicator
light will flash. The programme origi-
nally selected will continue to run as
normal. The indicator light will go out
when the selector is returned to its origi-
nal position.
To cancel a programme
Open the door or switch off the
machine.
To select a different program-
me
Turn the programme selector to “Fi-
nish”.
– The “Anti-crease/Finish” indicator
light will flash by itself to indicate that
the programme has been cancelled.
Turn the programme selector to the
drying level required.
Switch additional options on or off as
required.
Press the “START” button.
To open the door during a pro-
gramme to add or remove
garments
Cancel the programme by:
Pressing the “Door” button and open-
ing the door.
– Items can now be added or removed
early.
Restart the programme by:
Closing the door.
Pressing the “START” button.
– The programme will restart.
If there is a power cut, TIMED
DRYING programmes have to be re-
started once the power supply is
restored.
Altering a programme
18
To Next Page
Loading...
Need help?
General
