Cleaning the lint filter
The lint filter must be cleaned after
every program.
^ Open the door and remove the lint
filter, 1, by gently lifting it upwards.
^
Wipe the lint off the filter with your
hand (do not use any sharp objects!)
^ Remove the lint from the door frame
lint filter with your fingers.
^ Any lint remaining in the hollow
casing of the door can be removed
through the gap at the bottom with a
dust brush or vacuum.
^ Clean the gasket, 2, with a damp
cloth.
^ Return the lint filter and close the
door.
Dryer care
15
To Next Page
Loading...
Need help?
General
