3. Cleaning the fine filter in front of
the heat exchanger unit
Removing
^ Use the yellow lever (supplied) to
open the access panel.
^ Insert the lever in the middle of the
gap and lift it up gently (see arrow)
until the panel opens out at the top.
^ Remove the panel.
^
Turn the lever on the inner cover
downwards to the vertical position.
^
Pull the cover forwards.
^
Remove it by pulling it diagonally
upwards.
^
Pull the fine filter out by the handle.
^
Press the stoppers gently together
and then pull them out of the handle.
^
Pull the handle out of the fine filter.
Cleaning
^
Clean the fine filter thoroughly under
running water.
^
Then squeeze the fine filter
thoroughly.
Cleaning and care
32
To Next Page
Loading...
Need help?
General