Programmable functions
52
Altering the standard drying
level in
the"Automatic plus"
programme
The drying level for this programme is
set t
o the standard
Normal
level. You
have the option of changing the drying
level to
Hand iron (damper than
N
ormal) or to
Normal+ (drier than
Normal).
Follow steps (,, ...)
to
programme and store in memory.
Before you begin, ensure that:
– The tumble dryer is switched off.
– The door is closed.
– The programme selector is pointing
t
o
Finish.
P
ress
Start and k
eep it pressed in
whilst carrying out steps -.
Sw
itch the dryer on.
W
ait until the indicator light for the
Start butt
on lights up constantly . . .
.
. . and then release the
Start
b
utton.
T
urn the programme selector to
Cottons Hand iron.
The Empty container indic
ator light will
flash six times.
The option selected will be displayed
by a number
which will alternate with
.
S
tandard setting - Hand iron
F
actory default setting
(The
Clean out airways indicator light
will also flash once)
S
tandard setting will be Normal+
(The
Clean out airways indicat
or light
will also flash twice)
P
ressing the
Start butt
on switches
between the options.
Sw
itch the dryer off.
The setting you have selected is now
st
ored in memory. You can change it
again at any time.
To check the setting:
C
arry out steps -.
Switch the dr
yer off after checking.
To Next Page
Loading...
Need help?
General
