Transporting the dryer to the
installation site
The rear excess end of the lid has a
handle for transport.
^
Use the front dryer feet and the rear
excess end to transport the dryer
from the packaging base to the
installation site.
Level the dryer
The dryer must be level to ensure safe
and proper operation.
^
Unscrew the four feet as much as
necessary by turning the foot, 1,as
well as the locking ring, 2, to the left.
^
Once level, hold the foot, 1, still with
a wrench. At the same time turn the
locking ring, 2, to the right using
another wrench.
Installation
29
To Next Page
Loading...
Need help?
General
