Miele W 866 User Manual

A fault indicator light comes on but the wash programme
continues as normal.
What to do if ... Possible cause Remedy
The Check drain light
flashes.
The drain outlet is
restricted.
Clean the fluff (drain) filter
and drain pump.
The Check inlet light
flashes.
The water inlet is re
-
stricted or the water
pressure is too low.
–
make sure the stopcock is
opened wide enough.
–
make sure the inlet hose is
not kinked.
The filter in the inlet
hose is dirty.
Clean the filter.
The Drain/Final spin indi-
cator light flashes in the
programme sequence dis-
play.
The final spin has
not taken place. The
machine detected
an imbalance.
– Loosen and re-distribute
the washing.
– Select the programme
Spin or Drain .
– Take into account the spin
speed of the relevant
programme.
The Anti-crease/Finish in-
dicator light flashes in the
programme sequence dis
-
play.
The position of the programme selector was al-
tered after the start of the programme. Turn the
programme selector back to the programme previ
-
ously chosen.
Problem solving guide
46

Miele W 866 Specifications

General

Brand	Miele
Model	W 866
Category	Washer
Language	English

Summary

Guide to the Machine

Control Panel Explained

Detailed explanation of the washing machine's control panel buttons and indicators.

Warning and Safety Instructions

Correct Usage Guidelines

Technical Safety Precautions

Safety precautions related to electrical connection, earthing, and authorized repairs.

Usage and Installation Safety

Instructions on proper installation, avoiding freezing, and preventing foreign objects.

Before Using for the First Time

Flushing Out the Machine

How to Wash Correctly

Loading and Starting the Programme

Instructions for loading the drum correctly and initiating a wash programme.

Selecting Options and Spin Speed

Choosing additional wash options, spin speeds, and understanding memory functions.

Adding Detergent

Detergent Dosage and Water Hardness

Programmes

Programme Selection Guide

Table of programmes, fabric types, temperatures, and maximum spin speeds.

Programme Load, Options, and Notes

Programme Sequence Details (Part 1)

Detailed sequence for COTTONS, MINIMUM IRON, DELICATES, and WOOLLENS programmes.

Programme Sequence Details (Part 2)

Detailed sequence for Quick Wash, Starch, Spin, Separate rinse, and Mixed Wash programmes.

Washing Care Symbols Explained

Additional Options

Soak, Pre-wash, and Short Wash Options

Water Level, Spin, and Rinse Hold Options

Explanation of Water plus, Spin, Without final spin, and Rinse hold options.

Electronic Programme Locking

Programmable Functions

Maximum Water Level Function

How to select, activate, and store the Maximum water level function.

Water Plus System Options

Activating the Compartment Function

Soak Time Programming

Gentle Action Function

Top-Up Rinse for Cottons

Memory Function Control

Cleaning and Care

Washing Machine Exterior Cleaning

Detergent Dispenser Drawer Maintenance

Fluff Filter and Pump Cleaning

Procedure for cleaning the fluff filter and pump, including water drainage.

Water Inlet Filter Cleaning

Problem Solving Guide

Programme Start Issues

Troubleshooting steps when the washing programme fails to initiate.

Programme Stops with Fault Indicator

Steps to resolve issues when the programme stops and a fault light appears.

Fault Indicators During Operation

General Operational Problems

Addressing common issues like machine shaking, door opening, and draining problems.

Power Failure Door Opening and Water Pressure

Installation

Site Preparation and Transit Fitting

Transit Bar Re-fitting

Machine Levelling and Adjustment

Ensuring the machine is perfectly level by adjusting its feet.

Water Supply Connection

Connecting the washing machine to the mains water supply.

Drainage System Connection

Electrical Connection and Safety (UK)

Electrical connection procedures and safety regulations for the UK market.

Mains Wiring and Earthing

Technical Data