1.
2.
3.
4.
5.
6.
1.
2.
3.
Encryption: aes ccm;
Passphrase: strongwirelesspassword;
Click OK.
Click on the Configurations tab.
Choose one interface example: cfg-2ghz.
Find the Security and choose the previously created profile: security1.
Find the Country and set your Country.
Click OK.
Same for the cfg-5ghz-ac interface.
On the left menu choose System>Password.
Enter the password for the device and click Change.
To add another Audience device to the network (see " ").WPS Sync button
MikroTik mobile app
Use the MikroTik smartphone app to configure your router in the field, or to apply the most basic initial settings for your MikroTik home access point.
Scan QR code and choose your preferred OS.
Install and open application.
By default, the IP address and user name will be already entered.
Click Connect to establish a connection to your device through a wireless network.
Choose Quick setup and the application will guide you through all basic configuration settings in a couple of easy steps.
An advanced menu is available to fully configure all necessary settings.
Powering
The device accepts power from the power jack or from the Ethernet port:
Provided direct-input power jack (5.5 mm outside and 2 mm inside, female, pin positive plug) accepts 12-57 V DC .
Ethernet 1 port accepts 24-57 V DC .Passive PoE
The power consumption under maximum load can reach 30 W.
POE adapter is not included in a package, if you consider using it, please follow these steps:Connecting to a POE Adapter.
Connect the Ethernet cable from the Audience to the POE port of the POE adapter.
Connect an Ethernet cable from your LAN to the LAN port of the POE adapter, please mind arrows for data and power flow.
To Next Page
Loading...
Need help?
General
