wAP ac-series
wAP ac (RBwAPG-5HacD2HnD)
wAP ac ( )RBwAPG-5HacD2HnD-BE
Quickstart
Make sure your Internet service provider is allowing hardware change and will issue an IP address.
Open the bottom lid.
Plug the included PoE injector into the ISP outlet and attach an Ethernet cable to it.
Connect the other end of the Ethernet cable to this router.
Plug the provided power supply into the PoE injector.
Connect your computer to the wireless network.
Open in your web browser to start the configuration.https://192.168.88.1
User name: and there is no password by default.
admin
You will be logged into the configuration screen.
Click the " " button on the right side and update your RouterOS software to the latest version. Must have an active Internet
Check_for_updates
connection.
The device will reboot.
Choose your country on the left side of the screen, to apply country regulation settings.
Set up your wireless network password, the password must be at least eight symbols.
Set up your router password in the bottom field to the right and repeat it, it will be used to login next time.
Mounting
To Next Page
Need help?
General
