MikroTik cAP lite User Manual

1.
2.
3.
The power consumption under maximum load can reach 4 W.
Connecting to a POE Adapter:
Connect the Ethernet cable from the device to the POE port of the POE adapter.
Connect an Ethernet cable from your LAN to the LAN port of the POE adapter, please mind arrows for data and power flow.
Connect the power cord to the adapter, and then plug the power cord into a power outlet.
Configuration
Once logged in, we recommend clicking the "Check for updates" button in the QuickSet menu, as updating your RouterOS software to the latest version
ensures the best performance and stability. For wireless models, please make sure you have selected the country where the device will be used, to
conform with local regulations.
RouterOS includes many configuration options in addition to what is described in this document. We suggest starting here to get yourself accustomed to
the possibilities: . In case IP connection is not available, the Winbox tool ( ) can be used to connect to the MAC address https://mt.lv/help https://mt.lv/winbox
of the device from the LAN side (all access is blocked from the Internet port by default).
For recovery purposes, it is possible to boot the device from the network, see a section .Reset button
Reset button
The reset button has three functions:
Hold this button during boot time until LED light starts flashing, release the button to reset RouterOS configuration (total 5 seconds).
Keep holding for 5 more seconds, LED turns solid, release now to turn on CAP mode. The device will now look for a CAPsMAN server (total 10
seconds).
Or Keep holding the button for 5 more seconds until LED turns off, then release it to make the RouterBOARD look for Netinstall servers (total 15
seconds).
Regardless of the above option used, the system will load the backup RouterBOOT loader if the button is pressed before power is applied to the device.
Useful for RouterBOOT debugging and recovery.
Expansion slots and ports
One 10/100 Ethernet port, supporting automatic cross/straight cable correction (Auto MDI/X). Either straight or crossover cable can be used for
connecting to other network devices.
One Integrated Wireless 2.4 GHz 802.11b/g/n.
One USB type AB slot.
Accessories
Package includes the following accessories that come with the device:
DC EU/US Switching Power Supply 24 V, 0.2 A, 4.8 W, Level VI, cable:1.5m).
POE Injector with shielded ethernet cable/connector (RBPOE).
K-49 fastening set.
Map wall cover.
Operating system support
The device supports RouterOS software version 6. The specific factory-installed version number is indicated in the RouterOS menu /system resource.
Other operating systems have not been tested.
MikroTik mobile app

MikroTik cAP lite Specifications

General

Internal	No
Placement	Ceiling
Product type	-
Product color	White
Wall mountable	Yes
Processor cores	1
Processor model	Qualcomm Atheros QCA9533
Processor frequency	650 MHz
Ethernet LAN data rates	10, 100 Mbit/s
Maximum data transfer rate	54 Mbit/s
Output current	0.2 A
Output voltage	24 V
AC input voltage	5 V
Power source type	AC
Power consumption (typical)	4 W
Operating temperature (T-T)	-40 - 70 °C
USB connector type	Micro-USB
USB 2.0 ports quantity	0
Wi-Fi band	Single-band (2.4 GHz)
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
Antenna gain level (max)	1.5 dBi
Ethernet LAN interface type	Fast Ethernet
Flash memory	16 MB
Internal memory	64 MB
Operating system installed	RouterOS