CCR2216-1G-12XS-2XQ
CCR2216-1G-12XS-2XQ
Safety Warnings
Before you work on any equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard practices for preventing
accidents.
Ultimate disposal of this product should be handled according to all national laws and regulations.
The Installation of the equipment must comply with local and national electrical codes.
This unit is intended to be installed in the rackmount. Please read the mounting instructions carefully before beginning installation. Failure to use the
correct hardware or to follow the correct procedures could result in a hazardous situation for people and damage to the system.
Read the installation instructions before connecting the system to the power source.
It is the customer's responsibility to follow local country regulations, including operation within legal frequency channels, output power, cabling
requirements, and Dynamic Frequency Selection (DFS) requirements. All Mikrotik devices must be professionally installed.
First Use
Connect the device to the power source.
Use a Web browser or WinBox to connect to the default IP address of 192.168.88.1 from the first port, with the username and no password.
admin
If IP is not available, download WinBox from our webpage and use it to connect through MAC address.
Update RouterOS software to the latest version, and make sure that the device has an internet connection.
If the device does not have an internet connection update software by downloading the latest version from our webpagehttps://mikrotik.com
/download
Find the latest software and choose your packages.
To get the architecture type of your device model, open WinBox or WebFig and see (System/Resources).
Download packages to the PC and upload them to the WinBox, WebFig, (Files) menu, and reboot the device.
Set up your password to secure the device.
Powering
The device accepts powering from two redundant power supplies, each accepts 100-240 V AC power. You can use either, or both at the same time. Up to
128 W power consumption.
Extension Slots and Ports
Product code CCR2216-1G-12XS-2XQ
CPU AL73400 2 GHz
CPU architecture ARM 64bit
CPU core count 16
Size of RAM 16 GB
RAM type DDR4
Storage 128 MB, NAND
Number of 1G Ethernet ports 1
Number of 25G SFP28 ports 12
Number of 100G QSFP28 ports 2
Number of M.2 SATA slots 2
To Next Page
Need help?
General