Need help?Do you have a question about the MikroTik CRS226-24G-2S+IN and is the answer not in the manual?
General| Product Code | CRS226-24G-2S+IN |
|---|---|
| Ports | 24 |
| SFP+ Ports | 2 |
| RAM | 128 MB |
| Storage | 16 MB |
| Operating System | RouterOS |
| Architecture | MIPSBE |
| Size of RAM | 128 MB |
| Storage type | Flash |
| Voltage Monitor | Yes |
| PCB temperature monitor | Yes |
| PoE in | No |
| PoE out | No |
| MAC Address Table | 16K |
| Operating temperature | -20°C to 60°C |
| Packet Forwarding Rate | 41.7 Mpps |
Identifies the specific models within the CRS226-24G-2S+ series.
Step-by-step instructions for safely disassembling the router for repair.
Overview of the internal components and connections of the CRS210-8G-2S+.
Check essential voltages (Power IN, 3.3V, 1.2V) when the router fails to power on.
Diagnose and resolve issues with the main power input jack (J1) and its components.
Identify and replace components affecting the 3.3V power rail.
Diagnose and resolve problems related to the 1.2V power rail.
Address scenarios where Netinstall detects the board but fails to install firmware.
Troubleshoot connectivity and console output when LEDs indicate power but the board is unresponsive.
Diagnose and repair problems affecting individual Ethernet ports.
Troubleshoot and resolve issues with SFP+ ports.
Diagnose problems with temperature monitoring, voltage readings, or the LCD display.
Troubleshoot issues preventing a successful console connection to the device.
To Next Page