MikroTik CRS328-24P-4S+RM User Manual

1.
2.
3.
CRS328-24P-4S+RM
CRS328-24P-4S+RM
Quick start
Mount unit in a rackmount cabinet or place on the flat surface (see " ").CRS328-24P-4S+RM#Mounting
Connect to the power source (see " ").CRS328-24P-4S+RM#Powering
The Initial connection has to be done via the Ethernet cable, using the MikroTik Winbox utility.
Set IP for your PC to 192.168.88.2
Use Winbox to connect to the default IP address of 192.168.88.1 from any port, with the username and no password. admin
Update the device by clicking the "Check for updates" button to v6.46 or the latest RouterOS software to ensure the best performance and
stability. The device needs to have an active internet connection.
To manually update the device, go to our download pagehttps://mikrotik.com/download
Choose your architecture (ARM) and download the latest packages from any channel to your PC.
Open Winbox and upload packages in the Files menu.
Reboot the device.
Updating software will ensure the latest security fixes and regulations set by local law.
Set up your password to secure the device.
Mounting
The device is designed to use indoors and it can be mounted in a rackmount enclosure using provided rack mounts, or it can be placed on the desktop.
Please attach rubber pegs on the bottom of the router if the desired placement is on the flat surface or use a Phillips screwdriver to attach rackmount ears
on both sides of the device if designated use is for rackmount enclosure:
Attach rack ears to both sides of the device and tighten four screws to secure them in place, as shown in the picture.
Place the device in the rackmount enclosure and align with the holes so that the device fits conveniently.
Tighten screws to secure it in place.
The device has no protection from water contamination, please ensure the placement of the device in a dry and ventilated environment.
We recommend Cat6 cables for our devices.
Mounting and configuration of this device should be done by a qualified person.
Powering

MikroTik CRS328-24P-4S+RM Specifications

General

Switch type	Managed
Switch layer	L2/L3
Console port	RJ-45
SFP+ module slots quantity	4
Installed SFP modules quantity	-
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	24
VLAN support	Yes
Networking standards	IEEE 802.1Q, IEEE 802.3ad
Throughput	64 Mpps
Forwarding rate	95.2 Mpps
MAC address table	16000 entries
Form factor	1U
Product color	White
Flash memory	16 MB
Internal memory	512 MB
Processor frequency	800 MHz
AC input voltage	100 - 240 V
Power consumption (max)	44 W
Operating temperature (T-T)	-20 - 60 °C
Cables included	AC
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	305 mm
Width	443 mm
Height	44 mm