MikroTik CRS504-4XQ-OUT User Manual

Powering
Number of DC inputs 3 (PoE-in, DC jack, 2-pin terminal)
PoE-in input Voltage 43-57 V 802.3bt
DC jack input Voltage 36-57 V
2-pin terminal input Voltage 36-57 V
Power adapter nominal voltage 48 V
Power adapter nominal current 0.95 A
Max power consumption (without attachments) 25 W
Max power consumption 38 W
Configuration
RouterOS includes many configuration options in addition to what is described in this document. We suggest starting here to get yourself accustomed to
the possibilities: . https://wiki.mikrotik.com/wiki/Manual:CRS3xx_series_switches
The Initial connection has to be done via the Ethernet cable, using the MikroTik Winbox utility.
For recovery purposes, it is possible to reinstall the device from the network, by pressing the reset button while powering on the device.
In case the IP connection is not available, the Winbox tool ( ) can also be used to connect to the MAC address of the device.https://mt.lv/winbox
Extension Slots and Ports
4CRS504-4XQ-OUT
Product code CRS504-4XQ-OUT
CPU QCA9531 650 MHz
CPU architecture MIPSBE
CPU core count 1
Size of RAM 128 MB
Storage 32 MB, Flash
Number of 100M Ethernet ports 1
Number of 100G QSFP28 ports 4
Switch chip model 98DX4310
IP rating IP66
Dimensions 330 x 200 x 70 mm
Operating system RouterOS v7, License level 5
Operating temperature -40°C to +70°C
Reset button
To use the reset button, hold it and then turn on the device, while still holding the button.

MikroTik CRS504-4XQ-OUT Specifications

General

Brand	MikroTik
Model	CRS504-4XQ-OUT
Category	Switch
Language	English