Connect the device to the included PoE injector with Ethernet cable;
Connect the PoE injector into the PC or to the network switch;
Connect the power adapter to the PoE injector;
Download WinBox configuration tool https://mt.lv/winbox;
Open WinBox and connect to the device;
Default IP: 192.168.88.1, user name: admin, for the paired models IP: 192.168.88.2/192.168.88.3,
please find the password on the sticker;
Download the latest RouterOS software from https://mikrotik.com/download;
Choose ARM packages, and save them to your PC;
Open WinBox and upload downloaded packages, drag and drop into any windows;
Restart the device;
Connect again and in the QuickSet menu set your Country, to apply country regulation settings;
Set the Installation to Indoors or Outdoors, depending on the usage type;
Secure your device and set a strong password.
Safety Information:
Before you work on any MikroTik equipment, be aware of the hazards involved with electrical
circuitry, and be familiar with standard practices for preventing accidents. The installer should be
familiar with network structures, terms, and concepts.
Use only the power supply and accessories approved by the manufacturer, which can be found in the
original packaging of this product.
This equipment is to be installed by trained and qualified personnel, as per these installation
instructions. The installer is responsible for making sure, that the Installation of the equipment is
compliant with local and national electrical codes. Do not attempt to disassemble, repair, or modify the
device.
This product is intended to be mounted outdoors on a pole but can also be installed indoors. Please read
the mounting instructions carefully before beginning installation. Failure to use the correct hardware
and configuration or to follow the correct procedures could result in a hazardous situation for people
and damage to the system.
We cannot guarantee that no accidents or damage will occur due to the improper use of the device.
Please use this product with care and operate at your own risk!
In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging
the power adapter from the power outlet.
To Next Page
Loading...
Need help?
General
