MIMAKI JV5 Series Replacement Guideline

USA Document#20110329001 JV5/JV33/CJV30 Main PCB replacement guideline
2
3.
3.3.
3. Procedure to clear up
Procedure to clear upProcedure to clear up
Procedure to clear up
A.
A.A.
A. Equipment displays different equipment name or size other that what you have
Equipment displays different equipment name or size other that what you haveEquipment displays different equipment name or size other that what you have
Equipment displays different equipment name or size other that what you have
Different from
Different from Different from
Different from
what you have!!
what you have!!what you have!!
what you have!!
The parameters below must be set as the equipment type and size that you have.
JV5 series SYSTEM No.42 [ModelDS] SYSTEM No.44 [MECAsiz]
JV5-130S 0 0
JV5-160S 0 1
JV5-320S 0 3
JV5-320DS 1 3
Default
DefaultDefault
Default 0
00
0 0
00
0
JV33 series SYSTEM No.44 [MECAsiz]
JV33-130 1
JV33-160 2
JV33-260 4
D
DD
Default
efaultefault
efault 0
00
0
CJV30/TPC SYSTEM No.40 [ModelTA] SYSTEM No.44 [MECAsiz]
CJV30-60 0 1
CJV30-100 0 2
CJV30-130 0 3
CJV30-160 0 4
TPC-1000 1 2
Default
DefaultDefault
Default 0
00
0 1
11
1
*1 Reboot machine with main power switch after setting parameters
*2 Do not combine values other than above
BOOT JV5
JV5JV5
JV5-
--
-160S
160S160S
160S V4.00
POWER UP..
Then..

MIMAKI JV5 Series Specifications

General

Brand	MIMAKI
Model	JV5 Series
Category	Printer
Language	English