Replacing components
120
> MINI Mobility System, refer to the following
section
> Run-Flat Tires, page 104
> Tire change with space-saver spare tire,
page 122
MINI Mobility System with onboard tool
kit and tire change set*
MINI
The MINI Mobility System with onboard tool kit
and tire change set
*
is located under the floor
mat in the cargo bay.
1 Filling canister
2 Allen wrench
*
/screwdriver
3 Vehicle jack
*
4 Wheel stud wrench
5 Wrench, screwdriver/Phillips screwdriver,
towing eyelet
6 Compressor, hose with manometer and plug
for cigarette lighter socket
7 Package with filling hose, valve remover and
valve core
MINI Clubman
The MINI Mobility System with tire change set
and onboard tool kit is located under the floor
mat or the level load floor in the cargo bay.
1 Compressor, hose with manometer and plug
for cigarette lighter socket
2 Filling hose
3 Wheel stud wrench
*
4 Vehicle jack
*
5 Torx insert bit for screwdriver
6 Wrench
7 Flat screwdriver/Phillips screwdriver, towing
eyelet
8 Hub cover remover
9 Filling canister
Use of the MINI Mobility System may be
ineffective if the tire puncture measures
approx. 1/8 in/4 mm or more. Contact the near-
est MINI Dealer if the tire cannot be made driv-
able with the MINI Mobility System.<
Liquid sealant
1 Filling hose
2 Filling canister
Filling
1. Shake the filling canister.
2. Screw the filling hose onto the filling canis-
ter.
Online Edition for Part no. 01 41 0 014 701 - © 11/07 BMW AG
To Next Page
Loading...
Need help?
General
