To Next Page

To Previous Page

Reference At a glanceControlsDriving tipsMobility

6 Adjusting settings

> Confirmation signals when locking and

unlocking the vehicle 20

> Response during unlocking

procedure 19

> Automatic locking 22

> Pathway lighting 66

> Daytime running lamps 67

> Triple turn signal activation 43

7 Setting the time 54

8 Setting the date 55

9 Exiting the menu

Exiting displays

1. Briefly press the button in the turn indicator

lever repeatedly until "HOME" is displayed.

2. Press the button for a longer period.

The display again shows the outside tempera-

ture and the time.

Displays are also exited if no entries are made

for approx. 8 seconds.

Next setting or item of information

1. Within a setting or item of information,

briefly press the button in the turn indicator

lever repeatedly until "NEXT" is displayed.

2. Press the button for a longer period.

The display changes directly to the next setting

or item of information.

Formats and units of

measure

To set the formats and units of measure. The set-

tings are stored for the remote control currently

in use, refer also to Personal Profile on page 18.

1. Switch on the ignition, refer to page 39.

2. Briefly press the button in the turn indicator

lever repeatedly until "SET/INFO" is dis-

played.

3. Press and hold the button until the display

changes.

Mini cooper 2008 User Manual

Questions and Answers: