Everything under control
46
Current fuel consumption
Displays the current fuel consumption to allow
you to see whether your current driving style is
conducive to fuel economy with minimum
exhaust emissions.
Average speed
Periods with the vehicle parked and the engine
switched off are not included in the calculations
of average speed.
To reset average speed: press the button in the
turn indicator lever for approx. 2 seconds.
Current vehicle speed
To have the current speed shown in the upper
display for the outside temperature and time.
Press and hold the button in the turn indicator
lever until the display changes.
The outside temperature then appears in the
bottom display of the computer.
Settings and information
Operating principle
Certain settings and information are only avail-
able when the ignition is switched on and the
vehicle is at a standstill.
1 Button for:
> Selecting display
> Setting values
> Confirming selected display or set values
> Calling up computer information 45
2 Calling up Check Control 51
3 Displaying vehicle check 52
4 Initializing Flat Tire Monitor 55
5 Setting formats and units of measure, reset-
ting to factory settings 48
Online Edition for Part no. 01 41 0 013 069 - © 11/06 BMW AG
To Next Page
Loading...
Need help?
General
