Operation
Turn the wheel to set the de-
sired air flow.
The heating or cooling power
is more effective the greater
the air flow.
The air flow of the air conditioning system
is reduced as necessary to save the battery.
To adjust the air distribution manually
Principle
The air distribution for air conditioning can
be set manually.
Operation
Turn the wheel to select the
desired programme or the de-
sired intermediate setting.
– Windows.
– Upper body area.
– Footwell.
– Windows, upper body area and foot-
well.
Defrosting windows and removing
condensation
Perform the following settings to defrost
the windows and remove condensation:
– Direct the air distribution onto the win-
dows.
– Increase the air flow.
– Increase the temperature.
– Switch on the cooling function if nee-
ded.
Windscreen heating
Press the button. The LED is illumi-
nated.
The windscreen heating is switched off au-
tomatically after a certain period of time.
Rear window heating
Press the button. The LED is illumi-
nated.
The rear window heating is switched off au-
tomatically after a certain period of time.
Press and hold the button for more than
3 seconds for continuous activation. Press
the button again to deactivate.
The rear window heating can only be activa-
ted continuously at an outside temperature
below approximately 5 ℃/41 ℉.
If GREEN drive mode is activated, the heat-
ing power is reduced.
Microfilter
In outside and recirculated-air mode, the
microfilter filters dust and pollen from the
air.
Have this filter replaced during mainte-
nance, see page 302, of the vehicle.
Seite 197
Air conditioning CONTROLS
197
Online Edition for Part no. 01402988211 - II/18
To Next Page
Loading...
Need help?
General
