HOW TO TRAVEL WITH SPARE AIR
1.When taking Spare Air on commercial aircraft TSA
(Transportation Security Administration) requires air cylinders to
be empty. Purge Spare Air until empty of air.
2. Remove regulator from cylinder (they are attached hand tight) by
turning counter clock-wise. Leave o-ring, washer etc. on the
regulator.
3. Pack Spare Air in your check on luggage (NOT carry on).
4. Notify counter personnel when checking in for your flight that you
have a Spare Air mini-breathing system that is empty and
disassemble in your luggage.
5. When you reach your dive destination, reassemble Spare Air and
refill.You may lightly lubricate the tank 0-ring with a small amount
of silicone spray or grease – never use a hydrocarbon based oil.
Do not force regulator onto tank – if you feel resistance stop and
unscrew and start again.
6. Replace tank o-ring after product has been disassembled and re-
assembled 3 times, or o-ring shows signs of wear or air leakage.
7. Keep Spare Air regulator and cylinder threads clean and dry.
Note: We recommend the purchase of the SPARE AIR Travel
Pack #963 which includes a durable plastic carrying bag, 3
extra tank o-rings and protective caps for the regulator and
cylinder threads (go to website for more information).
Note: This product, Spare Air, is an emergency breathing
system that utilizes breathing air and is not hazardous.
11
To Next Page
Loading...
Need help?
General