Quick Reference Guide – Mitel 6867i Premium
For details on all the available features and options please refer to the 6867i IP Phone User Guide located at
http://mitel.ca/mitel-6867-sip-phone
Placing a Call
1. Lift the handset, press a Line key, or press the
key.
2. Dial the number from the keypad and press the
Dial softkey.
Ending a Call
Place the handset on its cradle or press the
key.
Answering a Call
Lift the handset for handset operation or press the Line key or key for handsfree
operation.
Ignoring a Call
Press the key or Ignore softkey when the phone is ringing to ignore the
call directly to voicemail.
Redialing
Press the key once to access a list of recently dialed numbers. Use the Up and
Down navigation keys to scroll through the entries and the Select key (or Dial softkey)
to redial the selected number. Press the
key twice to call the last dialed number.
Muting
Press the key to mute the handset, headset, or speakerphone.
Holding and Resuming
1. To place a call on hold, press the key when connected to the call.
2.
To resume the call, press the key again or press the Line key corresponding to
the line where the call is being held.
Options:
Accesses services and
options to customize
your phone.
Goodbye
Hold
Volume
Directory
Navigation/Select:
Multi-directional naviga-
tion keys that allow you
to navigate through the
phone’s user interface.
See UI Navigation for
more details.
Mute
Line/Call
Appearance:
Line presentation
for incoming and
outgoing calls.
Speaker/Headset:
Toggles the phone’s audio between speaker
and headset. If you are using a DHSG/EHS
headset, ensure that the headset jack adaptor
is removed from the headset port (indicated
by the f symbol). Refer to the 6867i Installation
Guide for more details.
Bottom Softkeys:
4 programmable/state-based soft-
keys that support up to 18 functions.
Left Softkeys:
6 programmable keys that
support up to 20 functions.
Presence:
See Other Features for
more details.
Transfer
Conference
Callers:
Accesses a list of
received/missed
incoming calls.
Redial
Warning!
The headset port is for headset use only.
Plugging any other devices into this port
may cause damage to the phone and will
void your warranty.
Getting Started Basic Call Handling
Warning!
The headset port is for headset use only.
Plugging any other devices into this port may cause
damage to the phone and will void your warranty.
Speaker/Headset:
Toggles the phone’s audio between speaker and
headset. headset jack adaptor If you are using a
DHSG/EHS and headset. If you are using a DHSG/EHS
headset, that the headset jack adaptor is removed
from the headset port (indicated by the symbol).
Refer to the 6867i Installation Guide for more details.
Navigation/Select:
Multi-directional navigation
key that allow you to navigate
through the phone’s user
interface. See UI Navigation
for more details.
HPBX-6867i_User_Guide-1607
To Next Page
Need help?
General
