Mitsubishi Heavy Industries FDC508HES3 User Manual

705
V MULTI
OFF 2.5MPa (25.5 kgf/cm
2
) OFF 2.75MPa (28 kgf/cm
2
)
ON 2.06MPa (21 kgf/cm
2
) ON 2.16MPa (22 kgf/cm
2
)
ThI-R
Tho-D
Tho-R
63H2
63H1
Indoor unit
Outdoor unit
Outdoor unit
Outdoor unit
18.2.6 Selection chart
Correct the cooling and heating capacity in accordance with the conditions as follows. The net cooling and heating capacity can be
obtained in the following way.
Net capacity = Capacity shown on specifications × Correction factors as follows.
(1) Coefficient of cooling and heating capacity in relation to temperatures
Outdoor air W.B. temperature (˚CW.B.) ISO-T1 Standard condition
Indoor air W.B. temperature (˚CW.B.)
ISO-T1 Standard condition
Outdoor air D.B.
temperature (˚CD.B.)
Cooling operation
I
ndoor air D.B.
temperature (˚CD.B.)
Heating operation
Coefficient of cooling and heating capacity
in relation to temperatures
Preset point of the protective devices
Parts name Mark
Thermistor
(for protection over-
loading in heating)
Thermistor
(for frost prevention)
Thermistor
(for detecting dis-
charge pipe temp.)
Thermistor
(for detecting heat
exchange temp.)
High pressure switch
(for controlling FM0)
High pressure switch
(for protection)
OFF 68˚C
ON 61˚C
Equipped
unit
FDC508HES3
OFF 2.5˚C
ON 10˚C
OFF 135˚C
ON 90˚C
OFF 70˚C
ON 60˚C
FDC808HES3, 1008HES3
OFF 2.41MPa (24.5 Kgf/cm
2
)
ON 1.86MPa (19.0 kgf/cm
2
)

Mitsubishi Heavy Industries FDC508HES3 Specifications

General

Brand	Mitsubishi Heavy Industries
Model	FDC508HES3
Category	Air Conditioner
Language	English