Mitsubishi Heavy Industries GT 1000 User Manual

―6―
Engine switch (Rocker Type)
Push the engine switch to the
“䡬” (OFF) position or turn the
key switch to the “䡬” (OFF)
po-sition.
Speed control lever
Move the speed con-trol to the
slow posi-tion and keep the en-
gine running for 1 or 2 minutes.
Engine switch (Rocker Type)
Push the engine switch to the
“ ” (ON) position.
Fuel cock
Open fuel cock.
S
Start
Stop
After starting the engine,
gradually return the choke
lever to the open position
while watching how the
engine is running.
• After warm-up operation
(about 5 minutes), align the
throttle with the required
speed.
After starting
Low
speed
Low
speed
Check
Open
slightly.
Open.Open.
Close
STARTING AND STOPPING ENGINE
•
Before starting the engine, carefully read and understand the “SAFE USE” and
“PRE-OPERATION ENGINE INSPECTION” sections of this instruction manual.
KN52045AA.eng11.2.1810:39AMページ6

Mitsubishi Heavy Industries GT 1000 Specifications

General

Brand	Mitsubishi Heavy Industries
Model	GT 1000
Category	Engine
Language	English