EasyManuals Logo

Mitsubishi Heavy Industries SRK20HG User Manual

Mitsubishi Heavy Industries SRK20HG
22 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
10
ON-TIMER operation procedure
1
2
Releasing procedure
Press the CANCEL button to turn off the timer
indicator.
Example: In the case you wish to bring the temperature to nearly set temperature in at 8:00.
Press the ON-TIMER button.
ON TIMER indicator is blinking.
3
Operation starts 5 to 60 minutes before the time that is set so that the room temperature reaches the optimum temperature at that time.
Page 11
ON-TIMER operation can be set regardless of whether the air-conditioner is running or not.
SLEEP operation + ON-TIMER operation procedure
Combined timer operation of SLEEP operation and ON TIMER.
Example: When it is desired to stop after 3 hours and then start operation at 8:00, near
the set temperature.
SLEEP operation setting
Set by the procedures on page 9.
Set to
ON TIMER operation setting
Set by the above mentioned ON TIMER operation procedure.
Set to
The setting of the lighting of the timer light (yellow) of this unit is complete.
h
After the SLEEP operation set time has elapsed, the operation stops, and it
starts from 5 to 60 minutes before the ON TIMERs time.
The timer light is not lit at the ON TIMERs time.
Changing of set time
Set a new time by using the SLEEP or ON TIMER button.
Releasing procedure
Press the CANCEL button to turn off the timer indicator.
Press the
or button.
Each time the button is pressed, the indicator is switched in the order of:
0:00 0:10 0:20
...
(Units of ten minutes)
1:00 1:10
Each time the button is pressed, the indicator is switched in the order of:
0:00 23:50 23:40
...
(Units of ten minutes)
23:00 22:50
Set at 8:00.
Press the ON TIMER button.
The indication changes from blinking to steady lighting and the setting is complete.
The timer light (yellow) is on.
h
Operation starts 5 to 60 minutes before the set time.
The TIMER light goes out at the set time.
Changing of set time
Set a new time by using the ON-TIMER button.
The present time is not displayed during ON-TIMER operation.
NOTE
Press within
60 sec.!
RKX012A014_En.p65 06.9.19, 9:34 AM10

Other manuals for Mitsubishi Heavy Industries SRK20HG

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mitsubishi Heavy Industries SRK20HG and is the answer not in the manual?

Mitsubishi Heavy Industries SRK20HG Specifications

General IconGeneral
BrandMitsubishi Heavy Industries
ModelSRK20HG
CategoryAir Conditioner
LanguageEnglish

Related product manuals