3-66
Features and controls
3
LOCK
The engine is off and the steering wheel is locked. The key can
be inserted and removed only when the switch is in this posi-
tion.
ACC
Allows operation of electrical accessories with the engine off.
ON
The engine runs and all accessories can be used.
START
Engages the starter. Release the key when the engine starts.It
will automatically back to the “ON” position.
OTE
● Your vehicle is equipped with an electronic immobilizer.
To start the engine, the ID code which the transponder
inside the key sends must match the one registered to the
immobilizer computer. (Refer to “Electronic immobilizer”
on page 3-30.)
ACC power auto-cutout function
N00539600058
After about 30 minutes has elapsed with the ignition switch in
the “ACC” position, the function automatically cuts out the
power for the audio system and other electric devices that can
be operated with that position.
When the ignition switch is turned from the “ACC” position,
the power is supplied again to those devices.
OTE
● It is possible to modify functions as follows:
• The time until the power cuts out can be changed to
about 60 minutes.
• The ACC power auto-cutout function can be deacti-
vated.
For details, we recommend you to consult an authorized
MITSUBISHI MOTORS dealer.
On vehicles equipped with Mitsubishi Multi-Communica-
tion System, screen operations can be used to make the
adjustment.
Refer to the separate Mitsubishi Multi-Communications
System manual for details.
BK0120400US.book 66 ページ 2010年5月12日 水曜日 午前10時50分