Mitsubishi 2010 RVR User Manual

Vehicle care and maintenance
7-13
7
3. Unclamp the cover. Open up the top of the cover and take
out the air cleaner filter.
4. Replacing the air cleaner filter and put the cover back on
in its original position.
N
OTE
● Genuine Mitsubishi Motors Parts are recommended when
replacing the air cleaner filter.
● Make sure that the connector is properly reconnected.
● After replacing the air cleaner filter, make sure that the
hinges at the bottom of cover are firmly set.
5. Put the duct and upper cover back on in its original posi-
tion. For details, refer to “Removing and installing the
upper cover and duct” on page 7-18.
CAUTION
!
● Take care not to scratch the engine air flow sensor
when removing the air cleaner cover.
BK0120400US.book 13 ページ ２０１０年５月１２日 水曜日 午前１０時５０分

Mitsubishi 2010 RVR Specifications

General

Brand	Mitsubishi
Model	2010 RVR
Category	Automobile
Language	English