11
ADVANCED TECHNOLOGY
Press the button on the end of the left stock while turning on the head lamp to
turn on the Auto High Beam (AHB) operation. When an oncoming vehicle or/and
preceding vehicle approaches, AHB switches high-beam to low-beam until that
vehicle is clear of the vehicle’s detection area and switches back to high-beam
once the detection area is clear.
AUTOMATIC HIGH BEAM HEADLIGHTS (AHB) (IF EQUIPPED)
When you put the vehicle into reverse, the rear view camera only
will display the image behind the vehicle. To engage the Multi-View
camera, press the rectangular icon button above the Speech
button. This view can be seen in reverse or in drive, up to a speed
of 5 MPH. Cameras placed at four positions around the vehicle
provide visibility that would normally not be seen. The Display
Audio screen will show two images of the vehicle's immediate
surroundings.
MULTI-VIEW CAMERA
To Next Page
Loading...
Need help?
General
