Mitsubishi 2018 ECLIPSE CROSS User Manual

12
OPENING THE DISPLAY
1. With the ignition switch in the "ON"
position or the operation mode ON,
push
A
to open the display.
2. The launch screen will be displayed and
then the HUD information will display.
CLOSING THE DISPLAY
1. Press the
A
switch and the ending screen will display.
2. Screen will close.
Turning off the ignition will close the display automatically. DO NOT attempt to
close the screen manually.
ADJUSTING THE ANGLE OF THE DISPLAY
When the display is open, push the
B
to raise or lower the angle of the display.
ADJUSTING THE BRIGHTNESS OF THE DISPLAY
When the display is open, push
C
to adjust brightness of the display.
HEAD-UP DISPLAY (HUD) (IF EQUIPPED)
HUD OPERATIONS
TOUCHPAD CONTROLS (IF EQUIPPED)
ADVANCED TECHNOLOGY
The Head Up Display (HUD) shows information
on a transparent display so you can easily
check the following information while driving:
- Vehicle speed
- Cruise Control information
- Warning information from Forward
Collision Mitigation and Lane
Departure systems
- When utilizing the paddle shifters, the
display will show the current gear the vehicle is in
A BC
ONE FINGER FLICK: Move cursor
TWO FINGER FLICK (UP/DOWN): Vol up/down
HOME
Move to HOME Screen
AUDIO
Change an audio source or move to current
audio scource screen.
APPLE CARPLAY,
ANDROID AUTO
Move to Apple CarPlay or
Android Auto screen
BACK
Return to the previous screen.
TWO FINGER FLICK (LEFT/RIGHT): Audio
PUSH: Select

Mitsubishi 2018 ECLIPSE CROSS Specifications

General

Brand	Mitsubishi
Model	2018 ECLIPSE CROSS
Category	Automobile
Language	English