3-122
Features and controls
3
2. With the electronic compass in its compass setting mode,
press the “H” button to cause the electronic compass to
switch to its compass calibration mode.
3. Drive the vehicle slowly through one or more 360° turns
until the calibration has been completed in either direction
in a safe, open space with no other vehicles or buildings
around. This will automatically complete the adjustment,
calibrating the compass to the correct azimuth.
BK0115900US.book 122 ページ ２００９年１０月２７日 火曜日 午後１２時１分
To Next Page
Loading...
Need help?
General
