Mitsubishi ECLIPSE 2011 User Manual

7-58
Vehicle care and maintenance
7
2. Remove the socket and bulb assembly (D) by turning
them counterclockwise.
3. Disconnect the harness connector by pulling the tab (E) in
the direction of the arrow as shown. Then pull the harness
connector (F) to remove the bulb.
4. To install the bulb, perform the removal steps in reverse.
BK0115900US.book 58 ページ ２００９年１０月２７日 火曜日 午後１２時１分
Information Provided by:

Mitsubishi ECLIPSE 2011 Specifications

General

Brand	Mitsubishi
Model	ECLIPSE 2011
Category	Automobile
Language	English