EN-43
ENGLISH
FUNCTION DESCRIPTION
Setting
Pre-defined picture modes are provided so you can optimize your
projector image set-up to suit your program type. See "Selecting a picture
mode" on page 28 for details.
Brightness
Adjusts the brightness of the image. See "Adjusting Brightness" on page
29 for details.
Contrast
Adjusts the degree of difference between dark and light in the image. See
"Adjusting Contrast" on page 29 for details.
Color
Adjusts the color saturation level -- the amount of each color in a video
image. See "Adjusting Color" on page 29 for details.
Tint
Adjusts the red and green color tones of the image. See "Adjusting Tint"
on page 29 for details.
The function is only available when Video or S-Video with NTSC
system is selected.
Sharpness
Adjusts the image to make it look sharper or softer. See "Adjusting
Sharpness" on page 29 for details.
BrilliantColor™
Adjusts white peaking while maintaining correct color presentation. See
"Adjusting BrilliantColor™" on page 29 for details.
Color Temperature
See "Selecting a Color Temperature" on page 29 for details.
3D Color Management
See "3D Color Management" on page 30 for details.
Save Settings
Saves the settings made for User 1 or User 2 mode.
Quick Auto Search
See "Switching input signal" on page 23 for details.
Color Space Conversion
See "Changing Color Space" on page 23 for details.
2. PICTURE menu
3. SOURCE
menu
To Next Page
Loading...
Need help?
General
