10
2. Immobilisation / stabilization / lifting
1. How to determine if vehicle is ON / OFF
The operating range of the keyless operation key is limited to the interior of the vehicle.
OFF
Check that the illumination of the "power switch" and "combination meter" is off.
ON
All vehicle’s electrical devices can be operated.
The indicator lamp on the power switch illuminates blue. The indicator lamp turns off when the Hybrid EV System is
operating.
If you press the power switch without depressing the brake pedal, you can change the operation mode of the power
switch in the order of OFF, ACC, ON, OFF.
READY Indicator
The READY indicator keeps blinking until the Hybrid EV System is activated.
When the Hybrid EV System has activated normally and the vehicle becomes ready to run, the indicator stops
blinking and stays displayed. If the indicator keeps blinking, the vehicle cannot drive.
2. Support positions for Jack and Lift
CAUTION:
Be sure to support the specified locations only. Otherwise, damage of vehicle may occur.
○:Support position for Garage Jack ○:Support position for Jack or Axle stands or Lift
READY
Indicator
Front suspension crossmember
Rear hook
<Front side>
<Rear side>
To Next Page
Loading...
Need help?
General
